SA Series flotation cell is widely used for separating non-ferrous
metal, black metal, noble metal, non-metal mineral, raw body and
materials of chemical industry, which are subject to roughing and
scavenging of large and middle scale flotation plants.
Breathe in high volume, low power consumption
Spare parts have long use life
Each tank with suction, suction pulp and flotation triple function,
its flotation circuit, without any auxiliary equipment, the level
of configuration, easy to change in the process
Mineral slurry cycle reasonably, which can minimize coarse sand
deposits, is advantageous to the coarse mineral flotation.
The mineral slurry has self-control device, convenient adjustment.
SA type flotation machine impeller rotates, the fluctuation of the
impeller chamber under the action of pulp in the upper and lower
blades generate centrifugal force is flung around, make up and down
the impeller chamber form a negative pressure zone.At the same
time, the upper cover plate of the circular hole drawn into the
pulp after the cover on the impeller chamber, formed on the pulp
cycle.To throw the blade pulp, its lower pulp to complement to the
center, forming the next cycle of pulp.And the suction pipe, center
air cylinder is sucked into the impeller chamber, blended with
inhaled pulp, forming a large number of tiny air bubbles, steady
flow through the cover board, evenly dispersed in the groove, form
the mineralized bubbles.Mineralized bubbles rise to the foam layer,
scrape by scraper is the foam products.
XJM-SA series of flotation machine have many advantages such as big
running and good effect. There are six specifications including
SA4, SA6,SA8,SA 10, SA12,SA16.
Also, we can make XJX-T XJZ, and XJQM-14 deep-trough gassing type
flotation machine. Among them, XJQM-14 type and XJM-sl6 type have
been awarded the prize of Scientific Advanced Achievement and
Famous Brand Products by the former Ministry of Coal Industry and